CO2 laser cutting machine technology other than the obvious advantages of the method are:
Good (1) CO2 laser cutting technology cutting quality. Narrow incision (typically 0.1--0.5mm), high accuracy (typically holes center distance error 0.1--0.4mm, contour size error 0.1--0.5mm), cut good surface roughness (Ra is generally 12.5--25μm ), slit generally does not require further processing to welding.
(2) CO2 laser cutting machine technology cutting speed. Such as the use 2KW laser power, 8mm thick steel cutting speed of 1.6m / min; 2mm thick stainless steel cutting speed of 3.5m / min, small heat-affected zone, deformation is minimal.
(3) CO2 laser cutting machine technology to clean, safe, non-polluting. Greatly improve the operator's working environment. Of course, in terms of accuracy and cut surface roughness, CO2 laser cutting can not exceed the processing power; it is difficult to achieve in terms of cutting thickness flame and plasma cutting levels. But it significant advantages over proves: CO2 laser cutting already and are replacing part of the traditional method of cutting process, in particular cutting a variety of non-metallic materials. It is developing rapidly, increasingly widespread application of an advanced processing methods.