1 stone engraving machine before first boot the machine and the computer to determine all connected properly, and then turn the machine and the computer power supply. After the system is ready to enter NCStudio CNC system.
2 Select "Homing" menu after opening the control system. Machine will automatically return to the mechanical origin, and the correction system coordinate system. In some cases, such as the last normal shutdown, reboot and continue the previous operation, the user does not have to perform the mechanical reset operation. NCStudio system in the normal exit, it will save the current coordinate information. In addition, if the user confirms the current position is correct, you can not do this.
3 prior to processing, the user typically needs a machining program to be loaded, otherwise, some functions related to the automatic processing is invalid. Select "Open (F) | Open (O) ..." menu will pop up Windows standard file operations dialog box, you can choose where you want to open the file drive, path and file name. Click the "Open" button, the program will load processing system.
4 Determine the datum, the stone engraving machine X, Y manually go in both directions on the desired workpiece origin location, select "Set as the datum point of the current" menu, or coordinate the coordinate values of the current window position cleared, the processing procedure in the performance of the current position as the starting point for processing.