In order to make the best long-term engraving machine state , to achieve better results, extend the life of engraving machines , engraving machines specially recommend users do the following maintenance work :

A daily cleaning and maintenance

    Insist on frequent cleaning engraving machine motion rail and slider , screw or rack , electrical control box inside the tank chain lines and other parts of the dust , cutting waste and other refuse , remove the cover of each axis when necessary , to cover internal clean clean. Recommended that with a vacuum cleaner , is not equipped with the best high-pressure air gun to clean up.

Second, the routine lubrication and maintenance

    Insist on timely motion for engraving machine rails, screw and other parts rubbed the right amount of oil . If you disable a long time, the moving rail and screw, a threaded spindle motor shaft head rubbed with nut also to relatively more grease to prevent rusting .

Third, the use and maintenance of the spindle motor

    The spindle motor is the core feature engraving machine , after damage to its maintenance cost is higher. Proper use and maintenance , are directly related to their life .

    1 , always check the spindle motor and the cooling water temperature, such as the hot hand , will have to identify the reasons for the case of water-cooled motor to determine the pump is working properly. Must not also forced to use non-normal temperatures , this will only accelerate the abnormal spindle motor damage . Recommended that with industrial cooling machine, the device has a very intuitive temperature display, can be controlled in a natural circulation cooling water temperature plus 5 degrees.

    2 , unloading tool to clean up the threads of the nut and lubrication , fashion plate nut tool should ease the upper hand . Loading and unloading must not make brute force , otherwise it will cause abnormal damage to the rotor and spindle nut .

    3, if the engraving machine to stop using more than one day , the best residual water pipes and motors with high-pressure gas inside out , over the water to avoid poor motor after the motor scale accumulation , resulting in damage to the motor abnormalities .