Materials engraving machine can engrave there are many, such as wood carving wood engraving machine mainly,
advertising engraving machine is mainly sculpture pvc, acrylic, color plates, metal and other materials,
mainly small bronze sculpture bronze engraving machine and other materials, for these materials , size,
thickness and shape are different, and therefore needs to be fixed in different ways,
When engraving machine engraving plastic material and the material is not very thick it can be reposted tape affixed to the back of the material being carved and then affixed with adhesive tape on one side of the spray liquid glue, then paste it on a surface can be voided on,
which makes the engraving machine to avoid the use of double-sided tape, leaving it difficult to clean surfaces. Because reposted tape stripping and cleaning easy.
Use of specialized carved tape, the tape sticky side is stronger than the other side, so plates can be moved or replaced free.
Material to be engraved if the pressure on to be great, to consider whether to use a cone knife ,
if a diamond blade engraving machine engraving process moves too much pressure, the pressure will cause the tool to move side carved objects.
If you use an incorrect diamond knife, can also cause the same problem. A 90 or 100-degree diamond knife carving materials will be in-depth,
and makes the material being moved in the process of engraving.
If you use the engraving machine carving irregular shapes of the material, the surface is very firmly fixed,
but will be under pressure when subjected to shaking back and forth. At this point,
you can try some of the waste in an object underneath it to increase friction. Further we engraving machine Jinan quick article carrying packaging is retained,
while the material is irregular shape, but it is brought to its packaging may be very regular, and easy to be fixed, together with a strip of tape,
irregular shape of the object can easily be fixed. Try fixing its rules or instruments of the site, and give up its irregular site.
Engraving machine engraving material is generally a fixed way, whether it is advertising engraving machine, stone engraving machine or woodworking engraving machine
engraving machine manufacturers often equipped with multipupose pliers direct plate or card, and that they are made of iron, it is easy to be carvings cause damage
or make it fall in the engraving process, then use some rubber caps or rubber tube is fixed would be helpful for carving objects