Laser Power Supply
Fiber laser marking machine laser power is provided to power the fiber laser device, the input voltage of the AC AC220V. Marking machine installed in the control box.
Fiber Laser
Fiber laser marking machine adopts imported fiber laser pulse, the output laser mode long life, be designed and installed in the marking machine cabinet.
Galvanometer scanning system
Galvanometer scanning system is composed of an optical scanner and servo control of two parts. The system uses new technology, new materials, new processes, new works design and manufacturing.
Optical scanner uses magnetic deflection work moving servo motor. Having a scanning angle, peak torque, load inertia large, small electrical and mechanical time constants, work fast, stable and reliable. Precision Bearings offer ultra-backlash mechanism bottom axial and radial runout; "Electronic Torque stick" to replace the traditional torsion bar elastic material, greatly improving the reliability and long life working; zero power holding any position works both to reduce the use of power, but also reduces the heating effect of the device, save the thermostat; advanced high-stability precision position detection sensor technology provides high linearity, high resolution, high repeatability, low drift performance.
Optical scanner into the X-direction and Y-direction scanning system scanning system, each servo motor shaft is secured reflected laser lens. Each servo motors emit digital signals are controlled by a computer scanning trajectory.
Focusing System
Effect focusing system is parallel laser beam is focused at one point. Mainly f-θ lenses of different focal lengths different f-θ lens, marking effect and scope are not the same, fiber laser marking machine adopts imported high-performance focusing system, the standard configuration of the lens focal length f = 160mm, the effective scanning range Φ110mm. Users can be optional lens model.
Optional F-θ lens are:
f = 100mm, the effective focus range Φ65mm.
f = 160mm, the effective focus range Φ110mm.
Computer Control System
Computer control system is the entire laser marking machine control and command center, but also the software installation support. Through the acousto-optic modulation system, galvanometer scanning system coordinated control complete marking of the workpiece handling.
Fiber laser marking machine computer control system mainly including the chassis, motherboard, CPU, hard drives, memory, D / A card, floppy drive, monitor, keyboard, mouse, and so on.