Engraving machine is a tool operation time, rarely stop, but the use of high intensity for engraving machine is a danger, therefore engraving machine maintenance is required.
To maintain good engraving machine, we must first understand the type of engraving machine prone to failure, and to be able to do maintenance engraving machine.
1 engraving machine overtravel alarm. This time, it shows run engraving machine has reached its limit position, and can no longer continue to operate. Faced with this failure, we need to do is to check whether the design to be engraved exceeded the maximum range of engraving machine, or related accessories, etc. There are no loose screws, or whether the coordinate values in excess of the prescribed maximum. In overtravel time, only needs a manual mediation can make the smooth operation of engraving machine.
2 no alarm failure. The first step is to check out the cause of the malfunction engraving machine, because they do not know the specific location of the fault, it is necessary engraving machines from various parts of the installation is appropriate, screws and other small parts are also solid start, then step by step to troubleshoot a specific failure reasons. If it is ruled out hardware failure later, you can manually restore the machine mechanical origin.
3 engraving failure. In the process of carving in the event of a failure, then you need to check whether the cause because the screws loose, and to see whether it is its own operating wrong path, which leads to a failure to produce. Because the file is too large to see if the fault caused by the failure to identify the cause, you can quickly restore the machine to work properly.
Failure after treatment for engraving machine, the most important thing is a routine maintenance. Engraving machine every day at work more than 10 hours later, we must carry out a cooling process, and timely check whether the cooling water temperature standards. While maintaining the water of the cooling water.
