Machinery advertising engraving machine because of its use of a wide range of materials can be carved congregation , stable performance , low failure characteristics. Thus increasingly become advertising industry , marking the industry , showing the exhibition industry , as well as the device of choice for some of the plant. Hereby finishing some technical information about the engraving machine for repair maintenance of reference :
A : an axis or three-axis engraving machine does not move or walk properly
1 : Controls are loose or faulty.
2 : corresponding to the drive shaft failure .
3: The corresponding axis stepper motor failure .
4 : the corresponding couplings break out or loose.
5 : corresponding to the screw nut screw breakage or malfunction .
6 : corresponding to the fast axis of the slide malfunction .
7 : Drive subdivision , current, and software settings are not the same.

II: z -axis engraving machine control
1 : Controls are loose or faulty.
2 : static interference .
3: z -axis motor cable fault
4: The file path is incorrect
5 : Drive interference
6: The computer system has a problem or a virus
7: operator error

Three: Error
1: Control Carcassonne action or failure
2 : drive failure
3 : stepper motor failure
4: static interference
5 : Motor line failure
6 : The data line failure
7 : The path is wrong
8: broken or loose coupling
9 : Processing speed is too fast
0: The computer system problems or virus

IV: Engraving shades
1: Control Carcassonne action or failure
2 : Step recent motor failure
3 : drive failure or software settings are inconsistent with the current subdivision
4; z -axis motor cable fault
5 : Spindle motor failure
6 : Drive interference or data set incorrectly
7: static interference
8: computer virus or system problems

Five: random moment
1: The control card failure
2 : Inverter interference
3: The file path is incorrect
4: static interference
5 : The software provided with the problem
6: drive failure or current breakdown is set incorrectly
7 : The data line failure
8: The computer has a virus or system problems

Six: engraving machine washable end injustice
1: The spindle and the table is not perpendicular . Need correction
2 : The tool in question
3 : Control card problem

Seven: engraving machine can not normally Homing
1: in the opposite direction
2 : Control card failure or loose
3 : limit switch or data line failure
4 : Drive Failure
5 : Step recent motor failure