Core Tip: 1, for our friends who do the engraving, the most important point is that according to the hardness of stone carving knives and carving material properties to determine a reasonable amount of cutting, which is what we usually call each under the knife depth.
1 , for our friends who do the engraving , the most important point is that according to the hardness of stone carving knives and carving material properties to determine a reasonable amount of cutting , which is what we usually call each under the knife depth.
2 , we can also be carried out in accordance with the actual situation and then roughing finishing , roughing , removal of all possible margin , saving finishing time ; better processing performance of the tool material can also be used . Stone engraving machine performance not only in the machine's hardware configuration, we also need to accumulate a little bit of experience in processing , improve processing efficiency
3 , each material cutter knife to eat will have a maximum amount we use wood engraving machine for processing time try not to eat processed with the greatest amount of cutter knife , a long process , the tool damaged faster. And when you eat at the maximum processing speed is also not to mention the amount of the knife up , the speed is likely to result in a faster cutting knife .
So we would be better to set the amount of the knife maximum amount of 2 / 3 , so that the tool life will greatly increase the processing speed can also improve a lot ; tool costs can be saved this way , you can improve processing efficiency.