Woodcarving aids
Mainly refers hammers , rasps , axes , saws . The purpose is to ax a lot of cutting back with a billet of wood , attention should not be cutting back on excessive force , can not cut straight up and down , the ax should remain with the grain perpendicular to around 45 degrees , otherwise the wood will crack . Rasps main purpose is blank stage in the fine carvings , and can replace the flat chisel marks knife to repair a flat track rasping light ; circular blade can be replaced or inclined to make hollow handle knives . Role rasps also lies in its ability to adjust quickly to a large area of modeling structure , and can be used in conjunction with the chisel, the figure was removed folded drapery lively and smooth handling , the actual situation has caused. Woodcarving hammers to shape flat , flat , wide , square as well. Hammer faces scale can be controlled by 7 × 5.5 × 2.5 cm. Too narrow or too thick, the placement will affect the accuracy of the hammer and force uniform. Hammers and iron two kinds of wood , wooden hammers commonly used than the major hardwood wood , such as rosewood , boxwood , rosewood , beech timber and fruit trees , with its specifications can be mastered in a length of 27 cm, width 55 cm , about 45 cm thick ; rounded grip slightly flat part of some , in the hands of a suitable size to prevail .
Woodcarving aids include small electric polishing machines and electric woodworking drill . Polishing machine that uses only surface treatment of creation , can replace a large area of polished hand work , when comparing time-saving , but only medium and large volume of relatively flat works using mainly hand hollow drill holes , making large-scale sculpture , the available RBI cut its contours .