For processing industry people, affect the number of products processed per unit of time with the product cost and profit . Stone engraving machine , too, so how can we improve processing efficiency, minimize processing costs yet. Here is my personal little experience, we can exchange ideas about.

For our friends who do stone carving , the most important point is that according to the hardness of stone carving knives and carving material properties to determine a reasonable amount of cutting , which is what we usually call each under the knife depth. Each material tool will have a maximum cutting depth , we use stone engraving machine for processing time try not to eat processed with the greatest amount of cutter knife , a long process , the tool damaged faster. And when you eat at the maximum processing speed is also not to mention the amount of the knife up , the speed is likely to result in a faster cutting knife . So we would be better to set the amount of the knife maximum amount of 2 / 3 , so that the tool life will greatly increase the processing speed can also improve a lot ; tool costs can be saved this way , you can improve processing efficiency.

We can also be carried out in accordance with the actual situation and then roughing finishing , roughing , removal of all possible margin , saving finishing time ; better processing performance of the tool material can also be used . Stone engraving machine performance not only in the machine's hardware configuration, we also need to accumulate a little bit of experience in processing , improve processing efficiency