First, before we start work, we should be careful to check the spelling in the text portion of the sculpture project. If possible, print it out and work with customers to confirm.
Second, protection carvings: engraving machine engraving process, carved objects often misplaced, we are often distressed to say to customers in their goods were damaged in the process of carving.
Third, in order to avoid these problems, we can try the following:
1 Check the choice of pliers or carved head is the wrong card? Meanwhile, wear engraving machine pliers or chuck will lead to dislocation carved objects. Pliers or the chuck if too tight, the head contact with instant carvings will lead to pop carved objects.
2 For those irregularly shaped object was carved on the surface seems to have been fixed very tight, and when under pressure will be around by the shaking. At this point, you can try some of the waste in an object underneath it to increase friction. Also retained is carrying goods packaging, although irregularly shaped objects, but it is brought to its packaging may be very regular, and easy to be fixed, together with a strip of tape, it is irregularly shaped objects easily fixed. Try fixing its rules or instruments of the site, and give up its irregular site.
3 is under pressure carvings suffered if large, consider whether you need to use the nose cone of a knife, if the diamond engraving machine head moves in the carving process pressure, the pressure will cause the tool side is carved objects movement. If you use an incorrect diamond knife, can also cause the same problem. A 90 or 100-degree diamond knife carving materials will be in-depth, and makes the material being moved in the process of engraving.
4 Due to the engraving machine is often equipped with multifunctional pliers or a card, and that they are made of iron, it is easy to damage the carvings in the engraving process or make it fall, then use some rubber or rubber tubes with caps will be fixed at the carvings help.
5 plastic patterns for carving can be posted adhesive tape on the back of carved objects, and then affixed with adhesive tape on one side of the spray liquid glue, then paste it on a surface can be set aside, to avoid the use of double-sided glue, leaving a clean surface is difficult. Because reposted tape stripping and cleaning easy. Use of specialized carved tape, the tape sticky side is stronger than the other side, so plates can be moved or replaced free