Be under pressure if the carvings suffered very large , consider whether you want to use must be the nose cone of a knife , when and if a diamond blade engraving machine engraving process moves too much pressure , the pressure side of the tool is the cause was carved moving object . If you are using a diamond knife incorrect , will also cause the same problem . A 90 or 100 -degree diamond knife carving materials will be in-depth , and allow the material to be moved in the process of engraving .
If it is a plastic material, it is possible to put stickers on the back of the tape posted carved objects , and then affixed with adhesive tape on one side of the spray liquid glue , then paste it on a surface will be able to set aside so that we can avoid the use of double plastic surface , leaving a clean surface is difficult . Posted tape very easy because we can peel and clean . Use of specialized carved tape , the tape sticky side is stronger than the other side , it can be freely plate is moved or replaced.
For those irregularly shaped object was carved on the surface seems to have been fixed is very tight , and when under pressure will be around by the shaking. In this case , the following objects can try these wastes to increase the friction pad . Also retained is the packaging of goods comes , although irregularly shaped objects , but brought the package itself may be very regular , and easy to be fixed , together with a strip of tape , the irregular shaped objects particularly easily fixed. Try tool holder or parts of its rules , and give up its irregular site.